BETU AQUA PRIMESEAL 
Aqua Primeseal is a concentrate water-based primer / sealer designed to penetrate concrete and masonry surfaces and form a barrier to eliminate sink back of subsequent topcoats.
 
RECOMMENDED USE
Plain concrete, concrete pavers, sandstone, limestone
This primer/sealer is used as a primer under the Betu Non-Slip Paint, Water Based Epoxy or the Water based Epoxy Flake Flooring Kit
 
FEATURES
Excellent bond strength
Non Flammable
Concentrated Formula
Fast drying
Internal / external use
Excellent penetration
Odourless
Easy to use
Value for Money
COVERAGE:
Aqua Primeseal comes in 1L concentrate and is mixed with 9ltrs of water to give 10L Primer. The coverage rate is approximately 6-8 m2 per L of mixed product (dependent on porosity), therefore 1L of concentrate after diluting is enough to prime 60m2 to 80m2 of substrate.
SURFACE PREPARATION
New concrete surfaces should be allowed to cure for 28 days. Surface should be free of grease, oil, dirt, efflorescence, laitance and paint. Heavily contaminated surfaces should be degreased. Ensure surface is clean, dry and dust free after cleaning. Any cracks should be repaired using Crack Repair, please consult TDS for application details.
Concrete surfaces that have been previously sealed must have all previous coatings removed.
When ready to apply Aqua Primeseal, mix 1 Litre of Aqua Primeseal to 9 Litres water
APPLICATION :
Aqua Primeseal can be applied by brush, roller, broom, and spray. Best results are achieved using a roller. Aqua Primeseal can be poured directly onto the surface, or into a roller tray. Ensure the entire surface it wet, avoid applying the sealer too thick or having it pool on the surface.
Ensure that the topcoat is applied within 12 hours of initial application. Ensure the surface is dry before subsequent application of topcoat. Please consult the relevant TDS for topcoat application details.
PACK SIZE : 1 Litre